Dimensions of the SWR Selfit Floor Trap
| Nominal Dia (mm) |
Nominal Dia (Inch) | L | H | Material Code | Standard Pkg. |
| 110 x 63 | 4" x 2" | 161.00 | 104.00 | 7703 | 32 |
| 110 x 75 | 4" x 2½" | 161.00 | 104.00 | 7704 | 32 |
| * All dimensions in "mm" | |||||
Related Products
-
COUPLER -
BEND 87.5° – PLAIN -
BEND 45° PLAIN -
BEND 45°- DOUBLE SOCKET -
BEND – DOUBLE SOCKET PLAIN -
BEND – DOUBLE SOCKET DOOR -
TEE – PLAIN -
TEE – DOOR -
TEE- DOUBLE SOCKET PLAIN -
TEE-DOUBLE SOCKET DOOR -
CROSS TEE – PLAIN -
CLEANING PIPE -
REDUCING BUSH -
REDUCING TEE – DOOR -
SWEPT TEE – DOOR -
SINGLE Y – PLAIN -
SINGLE Y – DOOR -
EQUAL Y – PLAIN -
EQUAL Y – DOOR -
DOUBLE Y – PLAIN -
DOUBLE Y – DOOR -
REDUCING Y – PLAIN -
REDUCING Y – DOOR -
REVERSE Y – PLAIN -
REVERSE Y – DOOR -
GULLY TRAP – SINGLE -
SQ. GULLY TRAP – WITH / W/O JALI -
HEIGHT RISER (6″) -
MULTI FLOOR TRAP – SQUARE JALI -
NAHANI TRAP - W/O JALI SINGLE PIECE -
NAHANI TRAP - JALI (Only JALI) -
Q – TRAP -
PIPE CLIP -
VENT COWL -
WC CONNECTOR -
WC CONNECTOR – BEND -
SOCKET PLUG -
DOOR CAP -
LIP SEAL (FOR WC CONNECTOR / TRAP) -
P TRAP -
SWR Multi Floor Trap Without a Jali Fitting -
SWR Pipe - Straight Connector -
NAHANI TRAP – W/O JALI SINGLE PIECE -
MULTI FLOOR TRAP – 7″ HEIGHT -
MULTI FLOOR TRAP – WITH JALI -
SWR Bend 87.5° - Door -
SWR Pipe S-Trap -
SWR Selfit Pipe - Reducer Fitting -
SWR Selfit Reducing Tee - Plain -
MFT PARTITION PLATE WITH CAP -
PAN CONNECTOR - STRAIGHT -
SWEPT TEE – PLAIN -
PAN CONNECTOR - OFFSET-18MM (P32) -
BEND 45° - SINGLE SOCKET -
PAN CONNECTOR - OFFSET-40MM (P30) -
RED. BUSH (ECCENTRIC) -
NAHANI TRAP - W/O JALI SINGLE PIECE
-
How does a floor trap differ from other types of plumbing traps?
A floor trap differs from other plumbing traps as it is specifically designed to be installed at ground level, typically within the flooring, to prevent foul odours and gases from entering the building.
-
Where are floor traps typically installed in buildings?
Floor traps are commonly installed in areas prone to water discharge or drainage, such as bathrooms, kitchens, utility rooms, and basements, where plumbing fixtures like sinks, showers, or floor drains are present.
-
What is the purpose of floor traps in plumbing systems?
The purpose of a floor trap in plumbing systems is to provide a barrier against foul odours, gases, and vermin from entering indoor spaces via drainage pipes, ensuring hygiene, safety, and compliance with building codes and regulations.
